Table of Contents
Advertisement
show interfaces serial
Copyright © 2010, Juniper Networks, Inc.
Unavailable seconds
Clock slip seconds
Path code violations
Line errored seconds
Bursty errored seconds
Degraded minutes
DS1 24 Hour Total Counters
Errored seconds
Severely errored second
Severely errored frame seconds = 0
Unavailable seconds
Clock slip seconds
Path code violations
Line errored seconds
Bursty errored seconds
Degraded minutes
See show controllers sonet remote.
Use to display information about the serial interfaces you specify.
Field descriptions
Serial Interface—Location of the interface
Description—Text description or alias if configured for the interface
ifOperStatus—Physical state of the interface
ifOperDown—Interface is not functioning
ifOperLowerLayerDown—Lower layer in the interface stack is not functioning
ifOperNotPresent—Module has been removed from the chassis
ifOperTesting—Interface is being tested
ifOperUp—Interface is functioning
snmp trap link-status—Enabled or disabled
Encapsulation—Layer 2 encapsulation display; options: ppp, frame-relay ietf, mlppp,
mlframe-relay ietf, hdlc
Crc type checking—Size of the CRC
Hdlc mru—Current size of the MRU
Hdlc mtu—Current size of the MTU
Hdlc interface speed—Current line speed of the interface
Hdlc idle-character—Current idle character
Invert data disabled—Status of the data inversion feature
Chapter 4: Configuring Channelized OCx/STMx Interfaces
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
165
Advertisement
Table of Contents
