Table of Contents
Advertisement
show controllers sonet ds3
Copyright © 2010, Juniper Networks, Inc.
Current Interval Counters
Errored seconds
Severely errored second
Severely errored frame seconds
Unavailable seconds
Clock slip seconds
Path code violations
Line errored seconds
Bursty errored seconds
Degraded minutes
Line code violations
24 Hour Total Counters
Errored seconds
Severely errored second
Severely errored frame seconds
Unavailable seconds
Clock slip seconds
Path code violations
Line errored seconds
Bursty errored seconds
Degraded minutes
Line code violations
See show controllers sonet.
Use to display T3 statistics for the different layers in channelized SONET and SDH
interfaces. Figure 8 on page 109 shows the layers in the interface.
For definitions of the MIB statistics, see RFC 2496—Definitions of Managed Objects
for the DS3/E3 Interface Types (January 1999).
Specify an interface in slot/port format.
To view information for a specific controller in a layer, enter the specifier for the
controller and the type for the controller. For example, to view T3 controller 1 on path
1 on the interface 4/0, enter show controllers sonet 4/0:1/1 ds3.
To view information for all controllers above a particular layer, enter the specifier for
the layer and the type for the controller. For example, to view all DS3 controllers on
the interface 4/0, enter show controllers sonet 4/0 ds3.
To view T3 statistics for a layer, specify the controller type, ds3.
To view the configuration for a controller or all controllers in a layer, omit the controller
type.
Field descriptions
Description—Text description or alias if configured for the interface
BERT test—Number of current test and total number of tests
Test interval—Length of the BERT test
status—Sync (controller is synchronized with remote device) or NoSync (controller
is not synchronized with remote device
Chapter 4: Configuring Channelized OCx/STMx Interfaces
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
155
Advertisement
Table of Contents
