Juniper JUNOSE 11.2.X PHYSICAL LAYER Configuration Manual page 183

For e series broadband services routers - physical layer configuration
Table of Contents

Advertisement

show controllers sonet remote
Copyright © 2010, Juniper Networks, Inc.
Example 6—This example displays the tributary statistics for the tributary 1/1/1 on path
1 on slot 4, port 0.
host1#show controllers sonet 4/0:1/1/1/1 tributary
Tributary 1/1/1
Current Tributary Interval Counters
Errored seconds
Severly errored seconds
Coding violations
Unavailable seconds
Last Tributary Interval Counters
Errored seconds
Severly errored seconds
Coding violations
Unavailable seconds
Current Far End Path Interval Counters
Errored seconds
Severly errored seconds
Coding violations
Unavailable seconds
Far End Last Tributary Interval Counters
Errored seconds
Severly errored seconds
Coding violations
Unavailable seconds
See show controllers sonet.
Use to display MIB statistics for the remote end of a channelized T3 interface configured
for MDL or for the remote end of a T1 channel configured for FDL.
Specify the all option to display detailed information for all 15-minute intervals.
For definitions of the MIB statistics for a T3 connections, see RFC 2496—Definitions
of Managed Objects for the DS3/E3 Interface Types (January 1999).
For definitions of the MIB statistics for a T1 connections, see RFC 2495—Definitions of
Managed Objects for the DS1, E1, DS2 and E2 Interface Types (January 1999).
Field descriptions for a T3 interface
Far End MDL Carrier bit—Status of MDL configuration on remote device connected
to T3 interface
set—MDL is configured for carrier mode
not set—MDL is not configured for carrier mode
Far End Equipment Identification Code—eic string sent by remote device for MDL
Far End Line Identification Code—lic string sent by remote device for MDL
Far End Frame Identification Code—fic string sent by remote device for MDL
Far End Unit Identification Code—unit string sent by remote device for MDL
Far End Facility Identification Code—pfi string sent by remote device for MDL
Chapter 4: Configuring Channelized OCx/STMx Interfaces
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
161

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents