Junos Os Xml Api And Scripting - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 5 Release Note

Hide thumbs Also See for JUNOS OS 10.4 - RELEASE NOTES REV 5:
Table of Contents

Advertisement

Table 1: Junos OS XML Tag Elements and CLI Command Equivalents New in Junos OS Release
10.4
Request Tag Element
<request-
dhcpv6-server-
reconfigure-information>request_dhcpv6_
server_reconfigure_information
<request-license-update>
request_license_update
<request-package-nonstop-upgrade>
request_package_nonstop_upgrade
Copyright © 2011, Juniper Networks, Inc.
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
NOTE:
This feature is applicable in both oversubscribed and line-rate modes.
1.
The control queue feature is enabled by default in both oversubscribed
2.
and line-rate modes, which can be overridden by the user configuration.
CLI show commands remain unchanged. When the control queue is
3.
disabled, various show queue commands continue to show the control
queue in the output. However, all control queue counters are reported
as zeros.
Enabling or disabling the control queue feature results in the PIC being
4.
bounced (offline/online).
Once the control queue feature is disabled, then the Layer 2 and Layer 3 control packets
are subject to queue selection based on the BA classification. However, the following
control protocol packets are not classified using BA classification, as they might not
have a VLAN, MPLS, or IP header:
Untagged ARP packets
Untagged Layer 2 control packets such as LACP or Ethernet OAM
Untagged IS-IS packets
When the control queue feature is disabled, untagged ARP/IS-IS and other untagged
Layer 2 control packets will go to the restricted queue corresponding to the forwarding
class associated with queue 0.
[Network Interfaces]

Junos OS XML API and Scripting

New Junos OS XML API operational request tag elements—Table 1 on page 13 shows
the Junos OS Extensible Markup Language (XML) operational request tag elements that
are new in Junos OS Release 10.4 along with the corresponding CLI command and
response tag element for each one.
CLI Command
request dhcpv6 server reconfigure
request system license update
request system software nonstop-upgrade
Response Tag Element
NONE
NONE
NONE
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOS OS 10.4 - RELEASE NOTES REV 5 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Junos os 10.4

Table of Contents