Routing Hierarchy; Services Hierarchy; Snmp Hierarchy - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

JUNOS OS 10.4 Release Notes
130
set protocols l2iw
set protocols bgp family inet flow
set protocols bgp family inet-vpn flow
set protocols igmp-snooping vlan all proxy

Routing Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
routing hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set routing-instances p1 services
set routing-instances p1 multicast-snooping-options
set routing-instances p1 protocols amt
set routing-options bmp
set routing-options flow

Services Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
services hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set services service-interface-pools

SNMP Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
SNMP hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set snmp community 90 logical-system
set snmp logical-system-trap-filter
set snmp trap-options logical-system
set snmp trap-group d1 logical-system
Copyright © 2010, Juniper Networks, Inc.