Hardware - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 5 Release Note

Known Limitations in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
Copyright © 2011, Juniper Networks, Inc.
On SRX Series and J Series devices, high CPU utilization triggered due to various reasons
like CPU intensive commands, SNMP Walks etc causes the BFD to flap while processing
large BGP updates.
For other limitations in flow and processing, see "Limitations of Flow and Processing" in
the Junos OS Security Configuration Guide.

Hardware

This section covers filter and policing limitations.
On SRX1400, SRX3400 and SRX3600 devices, the following feature is not supported
by a simple filter:
Forwarding class as match condition
On SRX1400, SRX3400 and SRX3600 devices, the following features are not supported
by a policer or a three-color-policer:
Color-aware mode of a three-color-policer
Filter-specific policer
Forwarding class as action of a policer
Logical interface policer
Logical interface three-color policer
Logical interface bandwidth policer
Packet loss priority as action of a policer
Packet loss priority as action of a three-color-policer
On SRX1400, SRX3400, SRX3600, SRX5600, and SRX5800 devices, the following
features are not supported by a firewall filter:
Policer action
Egress FBF
FTF
SRX1400, SRX3400, and SRX3600 devices have the following limitations of a simple
filter:
In the packet processor on an IOC, up to 100 logical interfaces can be applied with
simple filters.
In the packet processor on an IOC, the maximum number of terms of all simple filters
is 4000.
In the packet processor on an IOC, the maximum number of policers is 4000.
145