Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
30
The following table shows the RADIUS VSAs that are now supported for defining a
tunnel.
Attribute
Number
Attribute Name
26-8
Tunnel-Virtual-Router
26-9
Tunnel-Password
26-33
Tunnel-Max-Sessions
26-64
Tunnel-Group
[Subscriber Access]
Dynamic reconfiguration of extended DHCPv6 local server clients (MX Series
routers)—You can enable dynamic reconfiguration of DHCPv6 clients to enable the
extended DHCPv6 local server to initiate a client update without waiting for the client
to initiate a request. In subscriber management scenarios, a client may need to be
quickly updated with its network address and configuration in the event of server
changes, such as a restructuring of the service provider's addressing scheme or a change
in the local server IP addresses that were provided to the clients. Include the
statement to enable dynamic reconfiguration with default values for all DHCPv6 clients
at the
[edit system services dhcp-local-server dhcpv6]
clients serviced by a specified group of interfaces at the
dhcp-local-server dhcpv6 group group-name]
Optional statements enable you to modify default reconfiguration values: The number
of reconfiguration attempts, the interval between the first and second attempts, what
happens to the client if all reconfiguration attempts fail, what happens to the client in
the event of a RADIUS-initiated disconnect, whether to bind clients that do not support
reconfiguration, and whether to send an authentication token. Issue the
server reconfigure
command to initiate reconfiguration. Use the
and
binding
show dhcpv6 server statistics
interactions.
[Subscriber Access]
Support for ascend data filters (RADIUS attribute 242) in subscriber firewall filters
(MX Series routers)—You can now configure subscriber management to use ascend
data filters (ADFs) to create and apply firewall filters to subscriber traffic. The ADF
creates a rule that specifies match conditions on the source and destination IP address,
the protocol, and the source and destination port, and also specifies the action to
perform (such as accept or discard). The ADF rule also specifies the filter direction,
and can optionally provide traffic class and policer information. The router supports
ADF rules for family types inet and inet6.
Description
Virtual router name for tunnel
connection.
Tunnel password in clear text.
Maximum number of sessions
allowed in a tunnel.
Name of the tunnel group
(profile) assigned to a domain
map.
hierarchy level, and for DHCPv6
[edit system services
hierarchy level.
commands to monitor client-server
Copyright © 2011, Juniper Networks, Inc.
Value
string:
tunnel-virtual-router
string:
tunnel-password
integer: 4-octet
string:
tunnel-group-name
reconfigure
request dhcpv6
show dhcpv6 server
Advertisement
Table of Contents
