Juniper JUNOS OS 10.4 - RELEASE NOTES REV 5 Release Note page 154

JUNOS OS 10.4 Release Notes
154
Use the
show pfe terse
is and to verify the following:
Ready
All slots on the RG0 primary node have the status
All slots on the RG0 secondary node, except the Routing Engine slots, have the
status .
Valid
[PR/503389, PR/520093]
On SRX650 devices, when the primary node is synchronizing heavy routes to the
secondary node and the secondary node is rebooted, FPCs on the secondary node
come up very slowly. PICs will not come up until all the routes are synchronized to the
secondary node. [PR/545429]
Class of Service (CoS)
J4350 and J6350 devices might not have the requisite data buffers needed to meet
expected delay-bandwidth requirements. Lack of data buffers might degrade CoS
performance with smaller (500 bytes or less) packets. [PR/73054]
On J Series devices with a CoS configuration, when you try to delete all the flow sessions
using the clear security flow session
platform might fail over with heavy traffic. [PR/273843]
command to verify that the Packet Forwarding Engine status
command, the WXC application acceleration
Online .
Copyright © 2011, Juniper Networks, Inc.