Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
170
Application Layer Gateways (ALGs)
On J4350 devices in a NAT-PT environment, when the client was in an IPv6 environment
and the DNS server was in an IPv4 environment, the DNS server had only the IPv4
address record. When the client looked up the IPv6 address of the record in the DNS
server, DUT performed NAT-PT on the DNS ALG. When the client executed the lookup
action several times, a core file error was returned. [PR/533345: This issue has been
resolved.]
Chassis Cluster
On SRX5600 and SRX5800 devices, the IOC card reset unexpectedly when the
monitored IP addresses under chassis cluster IP-monitoring configuration was deleted.
In addition, the monitored IP was not deleted from the data plane when it was specified
without secondary interface. [PR/557687: This issue has been resolved.]
On SRX3600 devices, RG failover to Node0 failed because the FPCs went offline during
the failover. [PR/563391: This issue has been resolved.]
On SRX3600 devices, RG0 failovers caused interface flapping when LACP was used
on reth interfaces. [PR/565617: This issue has been resolved.]
Dual-Stack Lite
On SRX5600 devices, with heavy DS Lite traffic, flowd stopped responding with flow
table corruption because of a function related to flow table operation (for example,
flow_table_find_flow_v6). [PR/548790: This issue has been resolved.]
Flow and Processing
On SRX210 High Memory devices, error message "JMDX: Thread timed out waiting for
smi write" was continuously displayed. [PR/ 536586: This issue has been resolved.]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices under high traffic load,
some part of FTP and TFTP control sessions did not get timed out even after two hours
of stopping the traffic. [PR/548250: This issue has been resolved.]
On SRX5800 devices, TCP out of order packets occurred with the SRX acting as a GRE
pass-through device. [PR/558923: This issue has been resolved.]
Integrated Convergence Services
On SRX240 devices with Integrated Convergence Services running in survivable mode,
if two SIP stations were in a call and if either of the SIP stations made an attempt to
park the call by dialing the parking number 7000, the call was not parked. [PR/505240:
This issue has been resolved.]
Interfaces and Routing
On SRX210 devices, the modem moved to the dial-out pending state while connecting
or disconnecting the call. [PR/454996: This issue has been resolved.]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the
counter
command gave error messages from the secondary node. [PR/477017: This
issue has been resolved.]
show datapath-debug
Copyright © 2011, Juniper Networks, Inc.
Advertisement
Table of Contents
