Table of Contents
Advertisement
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
Copyright © 2011, Juniper Networks, Inc.
Support for configuring shaping overhead—Support for CLI based configuration of
shaping overhead has been added to the PD-5-10XGE-SFPP Type 4 PIC.
Set bandwidth value on aggregated Ethernet interfaces—You can now set the
bandwidth value by using the
aggregate-interface unit number]
Additionally, the
show interfaces aggregate-inteface extensive
aggregate.logical-interface
it is configured. Also, the SNMP OID ifSpeed/ifHighSpeed of the aggregate logical
interface shows the corresponding bandwidth, when it is configured. When it is not
configured, the command shows it as the sum of the bandwidths of the member links
of the aggregate, as before.
Network interfaces
show
interfaces detail
/
extensive
truncated) names of the forwarding classes associated with queues.
[Network Interfaces]
Negotiate IP address option removed—The negotiate IP address option is no longer
allowed in the MLFR and MFR encapsulations.
Hardware restrictions in the output of the show interfaces extensive command
using the
show interfaces extensive
"Filter statistics" section will not be displayed because the hardware does not include
those counters.
New command to clear Link Aggregation Control Protocol statistics—A new
command,
clear lacp statistics
(LACP) statistics. Use the
clear interface statistics for a specific interface only by using the
option.
interface-name
[Interfaces Command Reference]
Change to the
show interfaces aenumber extensive
command no longer displays Link Aggregation Control Protocol
interfaces aenumber
(LACP) statistics. To display LACP statistics, use the
command.
[Interfaces Command Reference]
Increase in unit numbering for demux0 and pp0 interfaces—The unit numbering for
demux0 and pp0 interfaces has been increased to 1,073,741,823.
Diffie-Helman 2048-bit encryption is now supported—You can now configure
Diffie-Helman 2048-bit encryption (group14) for IPSec communications on
MultiServices PICs.
To use Diffie Helman 2048-bit encryption include the
the
[edit services ipsec-vpn ike proposal proposal-name]
To configure 2048-bit encryption for an IPSec policy, include the
at the
[edit services ipsec-vpn ipsec policy policy-name perfect-forward-secrecy
level.
statement at the
bandwidth value
hierarchy level.
commands now show the bandwidth of the aggregate when
command output (All platforms)—The output of the
command now adds a table that shows complete (not
command with a 100-Gigabit Ethernet PIC, the
, enables you to clear Link Aggregation Control Protocol
option to clear interface statistics. You can also
interfaces
command—The output of the
[edit interfaces
and the
show interfaces
—When
interfaces
show lacp statistics interfaces
dhgroup group14
statement at
hierarchy level.
keys group14
option
] hierarchy
show
show
41
Advertisement
Table of Contents
