Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
the interfaces from bridge domains to VPLS instances. To clear this issue, restart
multicast snooping. [PR/576058]
Services Applications
The output of the
show services ids destination-table
flow and related statistics in the IDS anomaly table for a certain period of time after
the flows are activated. [PR/490584]
The data channel applications for protocols such as FTP, TFTP, RTSP, and SIP are not
in the same application group as their control channel applications. For example,
control channel application junos:ftp is in the group junos:file-server, but the
corresponding data application junos:system:ftp-data is not in any group. [PR/507865]
On M Series and MX Series routers, after a hot-standby RMS, all existing flows are
dropped and it takes some time for new flows to appear with the state. This is due to
the limitation of the RMS. All existing traffic is dropped, and RPC is most impacted as
it has a long retry timer and takes a long time to recover. [PR/535597]
When unit 0 of the Multiservices PIC interface is not specified, the
traffic
command does not display the input packet's number properly for that particular
ms-I/F interface. [PR/544318]
When an snmpwalk is performed on the
subobjects, the "SPD_DB_SVC_SET_ADD_FAILURE" log message displays. [PR/546808]
FTP sessions that last long periods (several minutes or hours) are suddenly
disconnected when traffic is still flowing on the data channel. [PR/579475]
User Interface and Configuration
In the J-Web interface , the "Generate Report" option under Monitor Event and Alarms
opens the report in the same web page. [PR/433883]
Selecting the monitor port for any port in the Chassis Viewer page displays the common
Port Monitoring page instead of the corresponding Monitoring page of the selected
port. [PR/446890]
On MX Series routers, J-Web does not display the USB-related information under
Monitor>SystemView>System Information>Storage. [PR/465147]
When a new-line character (\n) is used within the op script argument descriptions, the
help output might display incorrectly, and could result in extra output being displayed
when the op script executes. [PR/485253]
In the J-Web interface, the options
for PPPoE logical interfaces are not supported on MX Series routers. [PR/493451]
The J-Web interface does not display the drop-profile-map, excess-priority, excess-rate,
and rate-limit (transmit rate) parameters which are supported for the schedulers
configuration. Use these parameters using the CLI. [PR/495947]
Warning messages related to pending commits are not triggered when the following
operations are performed:
Software->Upload
command might not display any
jnxSpSvcSetSvcType
,
Access Concentrator
Idle Timeout
monitor interface
object or any of its
, and
Service Name
55
Advertisement
Table of Contents
