Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
158
On SRX Series devices, the software upload and install package does not show a
warning message when there are pending changes to be committed. [PR/514853]
On SRX240 Low Memory devices, the LSQ interface transmitting both LLQ and non-LLQ
traffic drops out-of-profile packets of the LLQ traffic faster than it was dropping out
earlier. [PR/536588]
On SRX5800 devices, address overlapping is not supported when dual-stack lite works
with the source NAT and enables any of the following options:
persistent-nat
port no-translation
host-address-base (IP shifting)
[PR/540816]
On SRX3600 devices, if the interface address is changed to a new address that is also
the dual-stack lite concentrator address with the background traffic target to the
address, the user should manually clear the ipip cleartext sessions with the concentrator
address. The dual-stack lite concentrator will affect the traffic flow. [PR/541747]
On SRX5800 devices, in NAT mode, when SIP traffic is sent from the device packet
drop is seen at the beginning and later processing of traffic stops. [554685]
On SRX3400 and SRX3600 devices, when external radius server is down or terminated,
the mass of authentication requests could cause
[PR/568659]
Hardware
On SRX210 devices, the MTU size is limited to 1518 bytes for the 1-port SFP Mini-PIM.
[PR/296498]
On SRX240 devices, the Mini-PIM LEDs glow red for a short duration (1 second) when
the device is powered on. [PR/429942]
On SRX240 devices, the file installation fails on the right USB slot when both of the
USB slots have USB storage devices installed. [PR/437563]
On SRX240 devices, the combinations of Mini-PIMs cause SFP-copper links to go down
in some instances during bootup, restarting fwdd, and restarting chassisd. As a
workaround, reboot the device and the link will be up. [PR/437788]
authd
to generate a core file.
Copyright © 2011, Juniper Networks, Inc.
Advertisement
Table of Contents
