Juniper JUNOS OS 10.4 - RELEASE NOTES REV 5 Release Note page 122

JUNOS OS 10.4 Release Notes
122
13 Channel 13
14 Channel 14
auto Automatically selected
On SRX210 devices, packet drop might be seen while prioritizing multiple data streams
configured with the same multilink class on single-member-link ML bundles that are
configured between SRX Series and J Series devices and other types of devices. As a
workaround, ensure that each forwarding class is configured with one multilink class
on multilink bundles on SRX Series and J Series devices. This will avoid out-of-order
transmission of multilink fragments for a given multilink class. This is not applicable
to LFI traffic; also, when Q is marked for LFI, do not change the Q configuration.
On SRX210 devices with Integrated Convergence Services, TDM configuration change
might interrupt existing TDM calls. The voice calls do not work. Run the CLI
command after making a configuration change.
On SRX210 devices with Integrated Convergence Services, registrations do not work
when PCS is configured and removed through the CLI. The dial tone disappears when
the analog station calls the SIP station. As a workaround, either run the
command or restart the device.
On SRX5600 and SRX5800 devices, the
command has been changed to
On AX411 Access Points, the possible completions available for the CLI command
wlan access-point mav0 radio 1 radio-options mode?
implementations.
Now this CLI command displays the following possible completions:
Example 1:
user@host#
set wlan access-point mav0 radio 1 radio-options mode ?
Possible completions:
5GHz Radio Frequency -5GHz-n
a Radio Frequency -a
an Radio Frequency -an
[edit]
Example 2:
user@host#
set wlan access-point mav0 radio 2 radio-options mode ?
Possible completions:
2.4GHz Radio Frequency --2.4GHz-n
bg Radio Frequency -bg
bgn Radio Frequency -bgn
set security end-to-end-debug
set security datapath-debug
have changed from previous
Copyright © 2011, Juniper Networks, Inc.
restart rtmd
restart rtmd
CLI hierarchy
set