Juniper JUNOS OS 10.4 - RELEASE NOTES REV 5 Release Note page 8

Hide thumbs Also See for JUNOS OS 10.4 - RELEASE NOTES REV 5:
Table of Contents

Advertisement

JUNOS OS 10.4 Release Notes
8
ESMC support as per G.8264
CLI command selection of clock sources
Monitoring clock sources (maximum of two clock sources can be monitored
simultaneously)
Revertive and nonrevertive modes
To configure SyncE, include the
the
hierarchy level.
[edit chassis]
[Network Interfaces, Interfaces Command Reference]
Enhanced container interface allows ATM children for containers—M Series and T
Series routers with ATM2 PICs automatically copy the parent container interface
configuration to the children interfaces. Container interfaces do not go down during
APS switchovers, thereby shielding upper layers. This feature allows the various ATM
features to work over the container ATM for APS.
To specify ATM children within a container interface, use the
and
option at the
(primary | standby)
level.
To configure a container interface, including its children, use the
options at the
[edit interface ci-n]
Container ATM APS does not support inter-chassis APS. MLPPP over ATM CI is also
not supported.
[Network Interfaces]
Signaling neighboring routers of fabric down on T1600 and T640 routers—The
signaling of neighboring routers is supported when a T640 or T1600 router is unable
to carry traffic due to all fabric planes being taken offline for one of the following
reasons:
CLI or offline button pressed
Automatically taken offline by the SPMB due to high temperature.
PIO errors and voltage errors detected by the SPMB CPU to the SIBs.
The following scenarios are not supported by this feature:
All PFEs get destination errors on all planes to all destinations, even with the SIBs
staying online.
Complete fabric loss caused by destination timeouts, with the SIBs still online.
When chassisd detects that all fabric planes are down, the router reboots all FPCs in
the system. When the FPCs come back up, the interfaces will not be created again,
since all fabric planes are down.
Once you diagnose and fix the cause of all fabric planes going down, you must then
bring the SIBs back online. Bringing the SIBs back online brings up the interfaces.
statement and its substatements at
synchronization
[edit interface at-fpc/pic/slot container]
hierarchy level.
Copyright © 2011, Juniper Networks, Inc.
container-list cin
statement
hierarchy
cin
statement and its

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents