Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
changed, the FPC which hosts the interface might restart. This issue is specific to
non-ES type FPCs. [PR/565307: This issue has been resolved.]
When a firewall filter containing the packet loss priority (PLP) rewrite references a
policer that also contains the PLP rewrite, a two time PLP rewrite occurs with the PLP
bits of the packets matching the filter condition set on the PLP set action in the policer,
and later the PLP set action is set on the firewall filter. [PR/566896: This issue has
been resolved.]
Forwarding and Sampling
When a Routing Engine sampling is configured, and each flow server corresponds to
a different autonomous system type, the packet size of the exported cflowd v5/8/500
packets might increase. [PR/530008: This issue has been resolved.]
On a sampled traffic on a multi services PIC, the multicast convergence slows down
with the message "RPD_KRT_Q_RETRIES: Indirect Next Hop Update: No buffer space
available." [PR/554363: This issue has been resolved.]
Making any circuit cross-connect (CCC) filter changes might render the Packet
Forwarding Engine busy which might cause a slow statistics response. [PR/554722:
This issue has been resolved.]
When a loopback filter is configured, packets sent by the ASIC to the Packet Forwarding
Engine's CPU for generation of TTL expiry notification are dropped. [PR/555028: This
issue has been resolved.]
The mib2d process might crash when a race condition exists between the mib2d
process and the dfwd process. [PR/563419]
When a firewall filter with multiple terms references the same three color policer and
has the same count variable configured, any IP packets that match the second or later
terms might get corrupted. Use different count variables in each term to prevent this
issue. [PR/567546: This issue has been resolved.]
The Radius Accounting Interim message might not be sent immediately after a Change
of Authorization (CoA), even if the CoA is successfully processed and the
option is present in the configuration. [PR/570058: This issue
coa-immediate-update
has been resolved.]
High Availability
When a container interface (used in AE interfaces) is freed in the memory, the child
nexthop (member link) on the master Routing Engine is also freed. However, in some
cases, the child nexthop on the backup Routing Engine is not freed resulting in a crash.
[PR/562295: This issue has been resolved.]
Interfaces and Chassis
On TX Matrix Plus routers, the message "fru_is_present: out of range slot 1 for CIP" is
continuously sent on all the LCCs. [PR/48311: This issue has been resolved.]
During initialization, some garbage data can flow into the unused SONET interface.
This data is small in size and does not contain any SOP or EOP information. This data
consumes some D4P buffer memory. The D4P buffer does not remove this data until
more data comes into the buffer. Periodic health check reports the following status:
57
Advertisement
Table of Contents
