Table of Contents
Advertisement
Related
Documentation
Resolved Issues in Junos OS Release 10.4 for EX Series Switches
Copyright © 2011, Juniper Networks, Inc.
Management and RMON
On EX8200 switches, when an egress VLAN that belongs to a routed VLAN interface
(RVI) is configured as the input for a port mirroring analyzer, the analyzer appends an
incorrect
dot1q
(802.1Q) header to the mirrored packets on the routed traffic or does
not mirror any packets on the routed traffic. As a workaround, configure a port mirroring
analyzer with each port of the VLAN as egress input. [PR/445393]
Virtual Chassis
On an EX4200 Virtual Chassis, an automatic software update fails if you have
configured preprovisioning or mastership priority. [PR/557981]
New Features in Junos OS Release 10.4 for EX Series Switches on page 187
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for EX Series Switches
on page 189
Limitations in Junos OS Release 10.4 for EX Series Switches on page 190
Resolved Issues in Junos OS Release 10.4 for EX Series Switches on page 199
Errata in Documentation for Junos OS Release 10.4 for EX Series Switches on page 203
Upgrade and Downgrade Instructions for Junos OS Release 10.4 for EX Series Switches
on page 204
The following are the issues that have been resolved since Junos OS Release 10.3 for EX
Series switches. The identifier following the descriptions is the tracking number in our
bug database.
NOTE: Other software issues that are common to both EX Series switches
and M, MX, and T Series routers are listed in "Issues in Junos OS Release 10.4
for M Series, MX Series, and T Series Routers" on page 51.
Resolved Issues in Junos OS Release 10.4 for EX Series Switches
199
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.4 - RELEASE NOTES REV 5 and is the answer not in the manual?
Questions and answers