Now; Recurring; D.4 Recurring - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

changes can show up on the device, even if one of the event triggers occur. By default, devices
refresh randomly between 300 and 360 seconds after device startup with a full refresh every 12
hours.
For example, if you create a bundle and schedule it to launch when the device connects to the
network, the device must be manually refreshed or refreshed according to schedule before the
Adaptive Agent can upload or launch the bundle, even if the device connects to the network.
D.3 Now
Select this scheduling option to run the event immediately.

D.4 Recurring

The Recurring scheduling option lets you repeat the event at a specified interval.
NOTE: The following sections describe all of the Recurring schedule options. Depending on the
event or action you are scheduling, some options might not be available.
Recurring Schedule
Figure D-3
Bundle Schedules Types 111