Advanced Settings; E.25.2 Advanced Settings - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

Task Steps
Rename an 1. Select the check box next to the desired item, then click Edit > Rename.
entry
2. Specify the new name.
Remove an 1. Select the check box next to the desired item, then click Delete.
entry
Import the 1. Click Import, then specify the registry file whose contents you want to import.
contents of a
registry file
Search for a 1. Specify the name of the value or key that you want to search for.
registry value
2. Select Registry Key/Value, Registry Value Data, or Both.
name, registry
3. Select the Search within the selected nodes only check box to limit the search to
key, or both.
the node you selected in the Registry Tree list.
4. Click Search.

E.25.2 Advanced Settings

The Advanced Settings page lets you configure the registry settings to apply.
Action - Registry Edit Dialog Box: Advanced Settings Page
Figure E-28
Run Action As: Specify how you want the action to run:
System: The action is run under the Local System user and inherits Administrator-level
credentials. For example, the action has full rights to the
User: The registry file is applied using the logged-in user's credentials. For example, the action
has the same rights to the registry and the file system as the logged-in user. If you are changing
keys in the
HKEY_CURRENT_USER
rights assigned to the user, the action might or might not have rights to the
HKEY_LOCAL_MACHINE
action fails.
hive, you must run the action as User. Depending on the
hive. If you select User, the user must be logged in to the device or the
hive.
HKEY_LOCAL_MACHINE
Actions 163