Action - Terminate Application Prompt; Section E.30, "Action - Terminate Application Prompt - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

2 Select a language from the Locale drop-down list. The message displays only on devices in the
specified locale. You can create different messages, each with its own locale setting.
3 Specify the text you want to display on the device.
You can include
{0}
seconds to 0, after which the prompt is auto-accepted. For example, you could specify the
following text:
The application will terminate in {0} seconds. Please save your work.
The message displays for the number of seconds specified in the Seconds to be Displayed field.
4 Click OK.
To remove a prompt, select the check box, then click Remove.
E.30 Action - Terminate Application Prompt
The Action - Terminate Application Prompt dialog box lets you configure a prompt to notify users
before the application terminates, including the number of seconds to notify the user, the number of
times the prompt retries, and different messages for different locales.
Action - Terminate Application Prompt Dialog Box
Figure E-35
You access this dialog box by using the following methods:
As part of the process of creating a Directive bundle by using the Actions bundle category. For
more information, see
In ZENworks Control Center, click the Bundles tab, click the underlined link of a bundle in the
Name column of the Bundles list, click the Actions tab, click one of the action set tabs (Install,
Launch, Verify, Uninstall, Terminate, or Preboot), click the Add drop-down list, then select an
available action.
in your text to provide a running counter that counts down the number of
Section 2.1, "Creating Directive Bundles," on page 19.
Actions 173