Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual page 22

Wizard Page and Field
Add Actions page > Move Up
Add Actions page > Move Down
Add Actions page > Enable
Add Actions page > Disable
Add Actions page > Options
Add Actions page > Continue on
Failure
8 (Conditional) If you are creating an Apply Personality action, follow the wizard prompts until
you reach the Summary page, then skip to
Click Help for information about each page or refer to the following table:
Wizard Page and Field
Apply Personality page >
Upload a template from this
device field
Apply Personality page >
Specify a template on the
managed device field
Apply Personality page >
Path from where the PNP file
is to be loaded field
Apply Personality page >
Password to decrypt the PNP
file
9 (Conditional) If you are creating a Store Personality action, follow the wizard prompts until
you reach the Summary page, then skip to
Click Help for information about each page or refer to the following table:
Wizard Page and Field
Store Personality page >
Upload a template from this
device field
22 ZENworks 10 Configuration Management Software Distribution Reference
Details
Select the check box next to the action (or actions) you want to
move up. Click Move Up.
Select the check box next to the action (or actions) you want to
move down. Click Move Down.
Select the check box next to the action (or actions) you want to
enable. Click Enable.
Select the check box next to the action (or actions) you want to
disable. Click Disable.
Click Options. Modify the desired settings, then click OK to
return to the Add Actions page. Click the Help button if you need
additional information.
Select the check box next to the action (or actions) if you want
to continue performing the remaining actions in the set on failure
of the selected action. Select the check box in the Continue on
Failure column, then click Apply.
Step 10.
Details
Select this option and click
box. Browse to and select the template to upload.
Select this option to specify the path of the personality migration
template file on the managed device. You can also specify the UNC
path of the file.
Specify the path of the PNP file containing the migration settings
and data on the managed device. You can also specify the UNC
path of the file.
Select this check box to enter the password to decrypt the PNP file.
If you spanned the PNP file, be sure to keep the spanned files and
the PNP file in the same folder.
Step 10.
Details
Select this option and click
box. Browse to and select the template to upload.
to display the Upload Content dialog
to display the Upload Content dialog