Advanced Settings for redirection: Select the settings, such as drivers, printers, serial ports, and
smart cards, that you want to map to the remote desktop machine.
E.23 Action - Prompt User
The Action - Prompt User dialog box lets you specify that a prompt displays on the device and
configure its settings.
Figure E-25
You access this dialog box by using the following methods:
As part of the process of creating a Directive bundle by using the Actions bundle category. For
more information, see
In ZENworks Control Center, click the Bundles tab, click the underlined link of a bundle in the
Name column of the Bundles list, click the Actions tab, click one of the action set tabs
(Distribute, Install, Launch, Verify, Uninstall, Terminate, or Preboot), click the Add drop-down
list, then select an available action.
User Cancels Allowed: Specify whether the user can cancel the remaining actions in the action set.
For example, if the action set installs an application that requires a reboot, and you select this option,
the user can cancel the reboot, which, cancels the installation. The install action set is performed
again according to its schedule. For this reason, use this option carefully. There is no Cancel button
on the dialog box if you use the default setting of 0.
Seconds to be Displayed: Specify the number of seconds that the prompt is displayed before the
action is performed. For example, suppose you configure a prompt that appears during an
application installation before the device performs a required reboot. If you specify that the user can
cancel the action set and you specify that the prompt displays for 10 seconds, the prompt displays
for 10 seconds and then the device reboots.
156 ZENworks 10 Configuration Management Software Distribution Reference
Action - Prompt User Dialog Box
Section 2.1, "Creating Directive Bundles," on page
19.
Need help?
Do you have a question about the ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 and is the answer not in the manual?