Restart Options; Display Options; Install Options; Section A.1.1, "Restart Options - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

A.1.1 Restart Options
In some cases, installing an application requires restarting the workstation.
In the Install Parameters dialog box, select the desired Restart option:
None (default): Uses the MSI application's settings to determine whether or not a restart occurs.
ZENworks
Do Not Restart (/norestart): Never restarts the workstation during the install process. The
installation is not completed until the next time the workstation starts.
Prompt For Restart (/promptrestart): Prompts users before restarting the workstation. If users
answer No, the installation is not completed until the next time they manually restart.
Always Restart (/forcerestart): Forces the workstation to restart without prompting users.
A.1.2 Display Options
In the Install Parameters dialog box, select the desired Display options. You can choose to perform
the installation with or without a user interface, whether to display a modal dialog box at the end of
the install process (a modal dialog box demands a response from the user before the installation is
complete), or to hide the Cancel button so that users cannot cancel the installation.
No UI (/qn): Installs the application with no user interface (silent installation).
NOTE: This is the default installation option. If you want users to be aware that ZENworks
Configuration Management is installing an application to help prevent them from rebooting or
calling the help desk, change the display options to Basic UI (/qb) with No modal dialog at end (-)
and Hide Cancel button (!).
You can select the options in the dialog box or you can type
Parameters field.
Full UI (/qf): Installs the application with the full user interface and a modal dialog box displayed at
the end of the installation.
Reduced UI (/qr): Installs the application with a reduced user interface and a modal dialog box
displayed at the end of the installation.
Basic UI (/qb): Installs the application with a basic user interface consisting of a progress bar. The
following settings are available with this option:
No modal dialog at end (-): Displays a basic user interface with no modal dialog box
displayed at the end of the installation.
Modal dialog at end (+): Displays a basic user interface with a modal dialog box displayed at
the end of the installation.
Hide Cancel button (!): Displays a basic user interface without a Cancel button, so the user
cannot cancel the installation process.

A.1.3 Install Options

In the Install Parameters dialog box, select the desired Install options:
96 ZENworks 10 Configuration Management Software Distribution Reference
®
does not force a Restart option.
in the Command Line
/i /qb-!