Copying A Bundle's System Requirements; Managing Bundle Settings; Section 3.7, "Copying A Bundle's System Requirements; Section 3.8, "Managing Bundle Settings - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

u AND
v AND
w
OR
x AND
y AND
z
Nested Filters and Filter Sets
Filters and filter sets cannot be nested. You can only enter them in series, and the first filter or filter
set to match the device is used. Therefore, the order in which they are listed does not matter. You are
simply looking for a match to cause the bundle to be applied to the device.

3.7 Copying a Bundle's System Requirements

1 In ZENworks Control Center, click the Bundles tab.
2 In the Bundles list, select the check box next to the bundle.
3 Click Edit > Copy System Requirements.
If more than one check box is selected, the Copy System Requirements option is not available
on the Edit menu.
4 Select Bundles or Policies, then click Add to select the bundles or policies to which you want to
copy the selected bundle's system requirements.

3.8 Managing Bundle Settings

The Settings page lets you manage bundle settings, including the variables that are available for use
on bundles and content replication settings for ZENworks
Settings can be inherited from the following locations:
(System): The bundle is inheriting the setting established for the Management Zone
(Configuration tab > Management Zone Settings).
Folder: The bundle is inheriting the setting established for one of its parent folders.
Device: The bundle is not inheriting the setting, but the setting is configured directly on the
bundle.
®
Primary Servers and Satellite devices.
Managing Bundles 59