B Schedules; Now; No Schedule; Date Specific - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

Schedules
B
The following schedules are available for discovery and deployment tasks:
Section B.1, "Now," on page 119
Section B.2, "No Schedule," on page 119
Section B.3, "Date Specific," on page 119
Section B.4, "Recurring," on page 120
B.1 Now
Runs the task immediately after completing the task wizard.

B.2 No Schedule

Indicates that no schedule has been set. The task does not run until a schedule is set or it is manually
launched. This is useful if you want to create the task and come back to it later to establish the
schedule or run it manually.

B.3 Date Specific

The Date Specific scheduling option lets you specify one or more dates on which to run the task.

B.3.1 Start Dates

Click to display a calendar you can use to select a date for the task. You can add multiple dates
one at a time.

B.3.2 Run Event Every Year

Select this option to run the task every year on the dates shown in the Start Date(s) list.

B.3.3 Select When Schedule Execution Should Start

Select one of the following options:
Start Immediately at Start Time: Starts the task at the time you specify in the Start Time
field.
Start at a Random Time between Start Time and End Time: Starts the task at a randomly
selected time between the time you specify in the Start Time and End Time fields. You can use
this option to avoid possible network overload from concurrently scheduled tasks.
B
Schedules 119