Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual page 36

Wizard Page and Field
Select Command page >
Executable to run field
8 If you are creating an MSP Application bundle, follow the wizard prompts until you reach the
Summary page, then skip to
Click Help for information about each page or refer to the following table:
Wizard Page and Field
Select .msp File page >
Upload .msp file for normal
install field
Select .msp File page > Enter
UNC path of .msp file for
network install field
Select .msp File page >
Install the Novell File Upload
extension link
Select .msp File page >
Command Line Parameters
field
36 ZENworks 10 Configuration Management Software Distribution Reference
Details
The Select Command page lets you specify an optional executable to
run after the file installs. Click Browse to browse for and select
.msi
the executable to run.
If the executable is installed in the
managed device, you must use macros as follows:
On 32-bit managed device:
On 64-bit managed device:
If you have not installed the Novell File Upload extension on this
device, you must do so before you can browse to and upload files. For
more information, see Appendix C, "Novell File Upload Extension," on
page 105.
Step 12 on page 38.
Details
Use this option if you want the
Server and then distributed from the ZENworks Server to assigned
users and devices. This is referred to a normal install because
ZENworks Adaptive Agent copies the
device's local drive and then it is installed from the local
Use this option if you want to install from the
location. You must specify the complete path to the
as the source file during distribution to the workstation.
You can use a mapped drive or UNC path. If you use a drive
mapping, you must ensure that all workstations have the same drive
mapped to the source location. For this reason, we recommend that
you specify a UNC path.
After you create the MSP bundle, you cannot change the
filename; however, you can change the path to the
change the filename, the installation fails.
.msp
If you have not installed the Novell File Upload extension on this
device, you must do so before you can browse to and upload files.
For more information, see
Extension," on page 105.
After you select the .msp
is automatically populated, for example /p patch_package /qn where
/p designates a patch file,
and specifies an installation with no user interface (silent
/qn
installation). To install a
option.
You can, however, specify additional options. For more information,
see the MSDN Web site (http://msdn2.microsoft.com/en-us/library/
aa372866.aspx).
Program Files directory on the
%ProgramFiles%\filename
%ProgramFiles32%\filename
file copied to the ZENworks
.msp
.msp file to the managed
.msp
Appendix C, "Novell File Upload
file, the Command Line Parameters field
patch_package specifies the
file, you should normally use the
.msp
.
.
.msp file.
file on a network
.msp file to use
.msp
file. If you
.msp
.msp file,
/qn