Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual page 34

Wizard Page and Field
Select .msi File page >
Upload .msi file for normal
install field
Select .msi File page >
Enter UNC path of .msi file
for network install field
Select .msi File page >
Install the Novell File
Upload extension link
Select .msi File page >
Install Parameters field
Select .msi File page >
Unistall Parameters field
Select .msi File page >
Repair Parameters field
34 ZENworks 10 Configuration Management Software Distribution Reference
Details
Use this option if you want the
Server and then distributed from the ZENworks Server to assigned
users and devices. This is referred to a normal install because
ZENworks Adaptive Agent copies the
device's local drive and then the Microsoft Windows Installer program
installs the application from the local
NOTE: By default, ZENworks Control Center has a 30-minute timeout
value. If you leave ZENworks Control Center idle on your computer for
more than 30 minutes, you are prompted to log in again before
continuing. Because the upload process can take considerable time for
a large file, the default timeout value does not apply for this page.
.msi
Use this option if you want the Microsoft Windows Installer program to
install the application from the
must specify the complete path to the
during distribution to the workstation.
You can use a mapped drive or UNC path. If you use a drive mapping,
you must ensure that all workstations have the same drive mapped to
the source location. For this reason, we recommend that you specify a
UNC path.
After you create the MSI bundle, you cannot change the
filename; however, you can change the path to the
change the filename, the installation fails.
.msi
If you have not installed the Novell File Upload extension on this
device, you must do so before you can browse to and upload files. For
more information, see Appendix C, "Novell File Upload Extension," on
page 105.
Click to display the Install Parameters dialog box, then specify the
desired parameters. For more information, click the Help button or see
Section A.1, "Install Parameters," on page
Click to display the Uninstall Parameters dialog box, then specify
the desired parameters. For more information, click the Help button or
see Section A.2, "Uninstall Parameters," on page
Click to display the Repair Parameters dialog box, then specify the
desired parameters. For more information, click the Help button or see
Section A.3, "Repair Parameters," on page
file copied to the ZENworks
.msi
file to the managed
.msi
file.
.msi
.msi file on a network location. You
.msi file to use as the source file
.msi
.msi
95.
97.
99.
file. If you