Event; D.2 Event - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

Use Coordinated Universal Time (UTC): The Start Time is converted to Universal Coordinated
Time (UTC). Select this option to indicate that the Start Time you entered is already in Coordinated
Universal Time and should not be converted. For example, suppose you are in the Eastern time zone.
If you enter 10:00 a.m. and select this option, the Start Time is scheduled for 10:00 UTC. If you
don't select this option, the Start Time is scheduled for 14:00 UTC because Eastern time is UTC - 4
hours.

D.2 Event

This scheduling option lets you specify the event you want to trigger the scheduled action.
Event Schedule
Figure D-2
Select from the following triggers:
User Login: A user logs in to the device's operating system.
User Logout: A user logs out of the device's operating system.
Device Boot: The device powers on.
Device Shutdown: The device powers off.
On Device Lock: The device's operating system is locked.
On Device Unlock: The device's operating system is unlocked.
®
ZENworks Login: A user logs in to the ZENworks Management Zone.
ZENworks Logout: A user logs in out of the ZENworks Management Zone.
Device Connecting to Network (Windows Only): The disconnected device detects a new wired or
wireless network connection.
®
NOTE: At device startup, the ZENworks Adaptive Agent contacts a ZENworks Server according
to the device's refresh schedule to refresh its bundle, policy, configuration, and registration
information. If information changes, the Adaptive Agent must refresh its information before the
110 ZENworks 10 Configuration Management Software Distribution Reference