Preventing A Bundle From Being Deployed; Section 3.15, "Preventing A Bundle From Being Deployed - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

This page lets you specify on which content servers (ZENworks Servers and satellite servers)
the content is hosted.
The relationships between content and content servers that you create using this wizard
override any existing relationships. For example, if Bundle A is currently hosted on Server 1
and Server 2 and you use this wizard to host it on Server 1 only, Bundle A is excluded from
Server 2 and is removed during the next scheduled replication.
5a In the Excluded Primary Servers or Excluded Satellite Servers list, select the desired
content server.
You can use Shift+click and Ctrl+click to select multiple content servers.
You cannot include content on a satellite server without including it on the satellite
server's parent ZENworks Server. You must select both the satellite server and its parent.
5b Click the
Servers or Included Satellite Servers list.
6 Click Next to display the Finish page, then review the information and, if necessary, use the
Back button to make changes to the information.
7 Click Finish to create the relationships between the content and the content servers. Depending
on the relationships created, the content is replicated to or removed from content servers during
the next scheduled replication.

3.15 Preventing a Bundle from Being Deployed

A disabled bundle is not deployed to new managed devices or content servers. It remains on any
devices and content servers to which it has already been deployed.
1 In ZENworks Control Center, click the Bundles tab.
2 In the Bundles list, select the check box next to the bundle (or bundles).
66 ZENworks 10 Configuration Management Software Distribution Reference
button to move the selected content server to the Included Primary