Creating Imaging Bundles; Creating Windows Bundles - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

14 Click Finish to create the bundle as configured per settings on the Summary page.
When you click Finish, the bundle is created but it does not have users or devices assigned,
schedules, and group membership. At some point in the future, you need to configure
additional options for the bundle by continuing with
to Devices," on page 46

2.3 Creating Imaging Bundles

Imaging bundles let you performs operations before the operating system boots. The various
Imaging bundle types let you install images on one or more devices, or run ZENworks scripts
containing any commands that you can issue from the imaging bash prompt.
For more information about Imaging bundles, see the
Preboot Services and Imaging

2.4 Creating Windows Bundles

A Windows bundle lets you distribute a Microsoft* Windows Installer (MSI) package, Microsoft
Windows Software Patch (MSP) package, thin-client application, or other Windows-based
applications to a Windows device.
You can use ZENworks Control Center or the zman command line utility to create bundles. The
following procedure explains how to create a bundle using ZENworks Control Center. If you prefer
the zman command line utility, see
To create a Windows bundle:
1 In ZENworks Control Center, click the Bundles tab.
2 In the Bundle list, click New, then click Bundle to display the Select Bundle Type page.
3 Select Windows Bundle, then click Next to display the Select Bundle Category page.
or Section 3.3, "Assigning Existing Bundles to Users," on page
ZENworks 10 Configuration Management
Reference.
"Bundle Commands" in
Section 3.2, "Assigning Existing Bundles
"ZENworks Command Line
48.
Utilities".
Creating Bundles 31