Adding A Bundle To A Group; Section 3.4, "Adding A Bundle To A Group - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SOFTWARE DISTRIBUTION REFERENCE 10.3 30-03-2010 Management Manual

10 In the Schedule Type field, select one of the following schedules, then fill in the fields. For
detailed information, click the Help button on the wizard page or see the following sections:
Section D.1, "Date Specific," on page 109
Section D.4, "Recurring," on page 111
Section D.2, "Event," on page 110
11 (Conditional) If you selected Availability Schedule in
Availability Schedule page.
The availability schedule defines the dates and times when the bundle is available on the
managed device. ZENworks Adaptive Agent displays the bundle icon only during the times
defined by the schedule. The default schedule (no schedule) makes the bundle available at all
times.
The schedule applies regardless of whether or not the bundle is installed. For example, if a user
has not yet installed the bundle, it is only available for installation at the times specified by the
schedule. If a user has already installed the bundle, it is only available for running during the
scheduled times.
12 In the Schedule Type field, select one of the following schedules, then fill in the fields. For
detailed information, click the Help button on the wizard page or see the following sections:
Section D.1, "Date Specific," on page 109
Section D.4, "Recurring," on page 111
13 Click Next to display the Finish page, review the information and, if necessary, use the Back
button to make changes to the information.
14 Click Finish.
If you assign bundles to Active Directory users, the assignments are available to the users only if the
ZENworks server is able to resolve the DNS name of the Active Directory.

3.4 Adding a Bundle to a Group

You can add the bundle to any bundle groups that already exist or you can create a new bundle group
as part of the assignment process. The bundle inherits the group's assignments and schedules, which
means that you save time by managing one bundle group rather than each individual bundle. Adding
a bundle to a group is not the same as assigning a bundle to a group (user or device). For more
information on assigning bundles to devices, see
assigning bundles to users, see
1 In ZENworks Control Center, click the Bundles tab.
2 In the Bundles list, select the check box next to the bundle (or bundles).
3 Click Action > Add to Group.
Assigning Existing Bundles to Devices
Assigning Existing Bundles to
Step 5, click Next to display the Bundle
Users.
and
Managing Bundles 51