System Requirements; Zenworks Server Requirements - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Hide thumbs Also See for ZENWORKS LINUX MANAGEMENT 7.3 IR2 - INSTALLATION GUIDE 07-20-2009:
Table of Contents

Advertisement

System Requirements

2
The following sections provide the Novell
hardware and software:
Section 2.1, "ZENworks Server Requirements," on page 23
Section 2.2, "Database Requirements," on page 24
Section 2.3, "Managed Device Requirements," on page 25
Section 2.4, "Administration Workstation Requirements," on page 29

2.1 ZENworks Server Requirements

The network server where you install the ZENworks Server software must meet the requirements
listed in the following table:
ZENworks Server Requirements
Table 2-1
Item
Operating Systems
®
ZENworks
Requirement
®
SUSE
Linux Enterprise Server (SLES) 9, Support Pack (SP) 3, and
SP4 on the 32-bit (x86) and 64-bit (x86_64) architectures (Intel*
EMT64 and AMD* Opteron* processors).
When you install SLES 9, we strongly recommend that you perform a
Default installation. If you install SLES 9 using a Minimal installation,
which does not include X Window System* support, see
"Installing ZENworks Linux Management on a SLES 9 Server with a
Minimal Installation," on page
SLES 10, SP1, SP2 on the 32-bit (x86) and 64-bit (x86_64)
architectures (Intel EMT64 and AMD Opteron processors).
When you install SLES 10, it is strongly recommended that you
perform a Default installation. If you install SLES 10 by using a
Customize installation, some packages are required for ZENworks 7.3
Linux Management to install successfully. For more information, see
Section A.4, "Installing ZENworks Linux Management on a SLES 10
Server with a Customize Installation," on page
SLES 11 on the 32-bit (x86) and 64-bit (x86_64) architectures (Intel
EMT64 and AMD Opteron processors).
When you install SLES 11, it is strongly recommended that you
perform a Default installation. If you install SLES 11 by using a
customize installation, some packages are required for ZENworks 7.3
Linux Management to install successfully. For more information, see
Section A.5, "Installing ZENworks Linux Management on a SLES 11
Server with a Customize Installation," on page
Red Hat Enterprise Linux (RHEL) 4 AS Update 3 or later on the 64-bit
Intel (x86_64) architecture.
®
Linux Management requirements for
123.
123.
125.
2
Section A.3,
System Requirements
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks linux management 7.3 ir2

Table of Contents