Security Settings - Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual

Set for the boot menu should be displayed permanently without timing out by disabling
Continue Booting after a Time-Out.

21.3.5 Security Settings

Using this YaST module, you can also set a password to protect booting. This gives
you an additional level of security.
Procedure 21.5 Setting a Boot Loader Password
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Options.
3 In Password Protection, check Protect Boot Loader with Password and set your
password.
4 Click OK.
5 Click Finish to save the changes.
21.3.6 Disk Order
If your computer has more than one hard disk, you can specify the boot sequence of
the disks to match the BIOS setup of the machine (see
vice.map" (page 408)). To do so, proceed as follows:
Procedure 21.6 Setting the Disk Order
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Installation Details.
3 If more than one disk is listed, select a disk and click Up or Down to reorder the
displayed disks.
4 Click OK to save the changes.
Section 21.2.2, "The File de-
The Boot Loader 415