Figure 35.10 DHCP Server: Interface Configuration for Dynamic DNS
Network Interface Configuration
To define the interfaces where the DHCP server should listen and adjust the firewall
configuration, select Advanced → Interface Configuration from the expert confi-
guration dialog. From the list of interfaces displayed, select one or more that should
be attended by the the DHCP server. If clients in all of the subnets should be able
to communicate with the server and the server host also runs a firewall, adjust the
firewall accordingly. To do so, select Adapt Firewall Settings. YaST then adjusts
the rules of SuSEfirewall2 to the new conditions (see
Network Interface and Firewall"
original dialog by selecting Ok.
666
Installation and Administration
Figure 35.11, "DHCP Server:
(page 667)), after which you can return to the