Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 206

4 Select the appropriate installation server from those offered or use the boot options
5 Accept the license agreement then select a language, default desktop, and other
6 Click Yes, Install to start the installation.
7 Continue as usual with the installation (entering a password for root, completing
Network Installation—PXE Boot
To perform a network installation of a SUSE Linux Enterprise Service Pack via network,
proceed as follows:
1 Adjust the setup of your DHCP server to provide the address information needed
2 Set up a TFTP server to hold the boot image needed for PXE boot.
3 Prepare PXE boot and Wake-on-LAN on the target machine.
4 Initiate the boot of the target system and use VNC to remotely connect to the
5 Accept the license agreement then select a language, default desktop, and other
206 Installation and Administration
prompt to provide the type of installation source and its actual location as in
Section "Installing from a Network Server"
installation settings.
the network configuration, testing your Internet connection, activating the Online
Update service, selecting the user authentication method, and entering a username
and password).
For detailed instructions for installing SUSE Linux Enterprise, see
Installation with YaST
for PXE boot according to
Boot" (page 95).
Use the first CD or DVD of your SUSE Linux Enterprise Service Pack for this
and otherwise follow the instructions in
Server" (page 89).
installation routine running on this machine. See
(page 101) for more information.
installation settings.
(page 35).
Section 4.3.5, "Preparing the Target System for PXE
Section 4.3.2, "Setting Up a TFTP
(page 37). YaST starts.
Section 4.5.1, "VNC Installation"
Chapter 3,