Table of Contents
Advertisement
5 Click Yes, Install to start the installation.
6 Insert the appropriate media when prompted. Both the SP media and the original
product media are required, depending on the software installed.
7 Continue as usual with the installation (entering a password for root, completing
the network configuration, testing your Internet connection, activating the ZEN-
works® Online Update Service, selecting the user authentication method, and
entering a username and password).
Network Installation
Before starting a network installation of an SUSE Linux Enterprise SP, make sure that
the following requirements are met:
• A network installation source set up according to
Network Installation Source for Service Pack Media"
• A working network connection both on the installation server and the target machine
that includes a name service, DHCP (optional, but needed for PXE boot), and
OpenSLP (optional).
• The SUSE Linux Enterprise SP CD or DVD number 1 to boot the target system or
a target system set up for PXE boot according to
Target System for PXE Boot"
Network Installation—Boot from CD or DVD
To perform a network installation using the SP CD or DVD as the boot medium, proceed
as follows:
1 Insert the SUSE Linux Enterprise SP CD or DVD number 1 and boot your ma-
chine. A boot screen similar to the original installation of SUSE Linux Enterprise
10 is displayed.
2 Select Installation to boot the SP kernel then use
installation source (FTP, HTTP, NFS, or SMB).
3 Provide the appropriate path information or select SLP as the installation source.
Section 8.2.1, "Setting Up a
Section 4.3.5, "Preparing the
(page 95).
(page 202).
to select a type of network
F3
Updating SUSE Linux Enterprise
205
Advertisement
Table of Contents
Troubleshooting
