Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 92

92 Installation and Administration
entry. An overview of parameters and some examples are given in
Section 4.4, "Booting the Target System for Installation"
An example /srv/tftpboot/pxelinux.cfg/default file follows.
Adjust the protocol prefix for the installation source to match your network setup
and specify your preferred method of connecting to the installer by adding the
vnc and vncpassword or the ssh and sshpassword options to the
install entry. The lines separated by \ must be entered as one continuous
line without a line break and without the \.
default linux
# default
label linux
kernel linux
append initrd=initrd ramdisk_size=65536 insmod=e100 \
install=nfs://ip_instserver/path_instsource/product
# failsafe
label failsafe
kernel linux
append initrd=initrd ramdisk_size=65536 ide=nodma apm=off acpi=off \
insmod=e100 install=nfs://ip_instserver/path_instsource/product
# apic
label apic
kernel linux
append initrd=initrd ramdisk_size=65536 apic insmod=e100 \
install=nfs://ip_instserver/path_instsource/product
# manual
label manual
kernel linux
append initrd=initrd ramdisk_size=65536 manual=1
# rescue
label rescue
kernel linux
append initrd=initrd ramdisk_size=65536 rescue=1
# memory test
label memtest
kernel memtest
# hard disk
label harddisk
kernel
linux append SLX=0x202
implicit 0
(page 97).