Table of Contents
Advertisement
(no-)allow-ints
Allow interrupts during the execution of BIOS functions.
(no-)broken-psr
The "GetPowerStatus" function of the BIOS does not work properly.
(no-)realmode-power-off
Reset processor to real mode prior to shutdown.
(no-)debug
Log APM events in system log.
(no-)power-off
Power system off after shutdown.
bounce-interval=n
Time in hundredths of a second after a suspend event during which additional
suspend events are ignored.
idle-threshold=n
System inactivity percentage from which the BIOS function idle is executed
(0=always, 100=never).
idle-period=n
Time in hundredths of a second after which the system activity is measured.
The APM daemon (apmd) is no longer used. Its functionality is now handled by the
new powersaved, which also supports ACPI and provides many other features.
29.3 ACPI
ACPI (advanced configuration and power interface) was designed to enable the operating
system to set up and control the individual hardware components. ACPI supersedes
both PnP and APM. It delivers information about the battery, AC adapter, temperature,
fan, and system events, like "close lid" or "battery low."
The BIOS provides tables containing information about the individual components and
hardware access methods. The operating system uses this information for tasks like
assigning interrupts or activating and deactivating components. Because the operating
524
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
