Keyword
netdevice
hostip
netmask
gateway
nameserver
autoyast
install
vnc
vncpassword
usessh
If your autoinstallation scenario involves client configuration via DCHP and a network
installation source and you want to monitor the installation process using VNC, your
info would look like this:
autoyast:profile_source install:install_source vnc:1 vncpassword:some_password
If you prefer a static network setup at installation time, your info file would look like
the following:
autoyast:profile_source \
install:install_source \
hostip:some_ip \
114
Installation and Administration
Value
The network device to use for network setup (for
BOOTP/DHCP requests). Only needed if several network
devices are available.
When empty, the client sends a BOOTP request. Otherwise
the client is configured using the specified data.
Netmask.
Gateway.
Name server.
Location of the the control file to use for the automatic in-
stallation, such as
autoyast=http://192.168.2.1/profiles/.
Location of the installation source, such as
install=nfs://192.168.2.1/CDs/.
If set to 1, enables VNC remote controlled installation.
The password for VNC.
If set to 1, enables SSH remote controlled installation.