Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 414

2 Click Finish to apply your changes.
21.3.3 Default System
To change the system that is booted by default, proceed as follows:
Procedure 21.3 Setting the Default System
1 Open the Section Management tab.
2 Select the desired system from the list.
3 Click Set as Default.
4 Click Finish to activate these changes.
21.3.4 Boot Loader Time-Out
The boot loader does not boot the default system immediately. During the time-out,
you can select the system to boot or write some kernel parameters. To set the boot
loader time-out, proceed as follows:
Procedure 21.4 Changing the Boot Loader Time-Out
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Options.
3 Check Show Boot Menu.
4 In Boot Menu, change the value of Boot Menu Time-Out by typing in a new value,
5 Click OK.
6 Click Finish to save the changes.
414 Installation and Administration
clicking the appropriate arrow key with your mouse, or by using the arrow keys
on the keyboard.