Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 412

Use the Section Management tab to edit, change, and delete boot loader sections for
the individual operating systems. To add an option, click Add. To change the value of
an existing option, select it with the mouse and click Edit. If you do not want to use an
existing option at all, select it and click Delete. If you are not familiar with boot loader
options, read
Use the Boot Loader Installation tab to view and change settings related to type, location,
and advanced loader settings.
21.3.1 Boot Loader Type
Set the boot loader type in Boot Loader Installation. The default boot loader in SUSE
Linux Enterprise is GRUB. To use LILO, proceed as follows:
Procedure 21.1 Changing the Boot Loader Type
1 Select the Boot Loader Installation tab.
2 For Boot Loader, select LILO.
3 In the dialog box that opens, select one of the following actions:
4 Click OK to save the changes
5 Click Finish in the main dialog to apply the changes.
412 Installation and Administration
Section 21.2, "Booting with GRUB"
Propose New Configuration
Have YaST propose a new configuration.
Convert Current Configuration
Have YaST convert the current configuration. When converting the configu-
ration, some settings may be lost.
Start New Configuration from Scratch
Write a custom configuration. This action is not available during the instal-
lation of SUSE Linux Enterprise.
Read Configuration Saved on Disk
Load your own /etc/lilo.conf. This action is not available during the
installation of SUSE Linux Enterprise.
(page 402) first.