Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 496

is initially configured during installation. To change the settings afterwards, use the
respective module from the YaST control center or run SaX2 manually from the com-
mand line with the command sax2. The SaX2 main window provides a common inter-
face for the individual modules from the YaST control center.
Figure 27.1 The Main Window of SaX2
In the left navigation bar, there are six items, each of them showing the respective
configuration dialog from the YaST control center. Find the sections mentioned below
in Chapter 7, System Configuration with YaST
Monitor
For a description of the monitor and graphics card configuration, see
"Card and Monitor Properties"
Mouse
For a description of the mouse configuration in the graphical environment, see
Section 7.13.2, "Mouse Properties"
Keyboard
For a description of the keyboard configuration in the graphical environment, see
Section 7.13.3, "Keyboard Properties"
496 Installation and Administration
(page 137).
(page 190).
(page 194).
(page 195).
Section 7.13.1,