Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 104

Connecting to the Installation Program
1 Retrieve the installation target's IP address. If you have physical access to the
2 At a command line, enter the following command:
3 When prompted for a username, enter root.
4 When prompted for the password, enter the password that has been set with the
5 Enter yast to launch the installation program. A window opens showing the
104 Installation and Administration
target machine, just take the IP address the installation routine provides at the
console after the initial boot. Otherwise take the IP address that has been assigned
to this particular host in the DHCP server configuration.
ssh -X root@ip_address_of_target
Replace ip_address_of_target with the actual IP address of the installation
target.
SSH boot option. After you have successfully authenticated, a command line
prompt for the installation target appears.
normal YaST screens as described in Chapter 3, Installation with YaST (page 35).