Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 922

3 Exit the menu with
4 Open Configure Adapter Settings. Under Additional Options, select Boot Device
5 Enter the ID of the CD-ROM drive and press
6 Press
7 Exit this screen and confirm with Yes to boot the computer.
Regardless of what language and keyboard layout your final installation will be using,
most BIOS configurations use the US keyboard layout as depicted in the following
figure:
Figure 52.1 US Keyboard Layout
Esc
~ !
` 1
Q
Tab
Caps
Lock
Shift
Ctrl
52.2.3 Fails to Boot
Some hardware types, mainly fairly old or very recent ones, fail to install. In many
cases, this might happen because support for this type of hardware is missing from the
installation kernel or due to certain functionalities included in this kernel, such as ACPI,
that still cause problems on some hardware.
If your system fails to install using the standard Installation mode from the first instal-
lation boot screen, try the following:
922 Installation and Administration
Make note of the SCSI ID of your CD-ROM drive.
Esc
Options and press
Enter
twice to return to the start screen of the SCSI BIOS.
Esc
F1 F2 F3 F4 F5 F6
@ # $ % ^ & *
2 3 4 5 6 7 8
W E R T Y U
A S D F G H J
Z X C V B N
Alt
.
.
F7 F8 F9 F10 F11 F12
( ) _ + | <--
9 0 - = \
I O P { }
[ ]
K L : "
; ' Enter
M > ?
<
Shift
, . /
Alt Ctrl
again.
Enter