Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 943

3 Select Automatic Repair.
YaST now launches an extensive analysis of the installed system. The progress
of the procedure is displayed at the bottom of the screen with two progress bars.
The upper bar shows the progress of the currently running test. The lower bar
shows the overall progress of the analysis. The log window in the top section
tracks the currently running test and its result. See
Mode" (page 943). The following main test runs are performed with every run.
They contain, in turn, a number of individual subtests.
Figure 52.2 Automatic Repair Mode
Partition Tables of All Hard Disks
Checks the validity and coherence of the partition tables of all detected hard
disks.
Swap Partitions
The swap partitions of the installed system are detected, tested, and offered
for activation where applicable. The offer should be accepted for the sake
of a higher system repair speed.
File Systems
All detected file systems are subjected to a file system–specific check.
Figure 52.2, "Automatic Repair
Common Problems and Their Solutions 943