Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 172

Fetching Mail
Configures mail pick-up from external mail accounts over various protocols.
Mail Server Domains
This determines for which domains the mail server should be responsible. At least
one master domain must be configured if the server should not run as a null client
used exclusively for sending mail without receiving any.
Distinguish among three domain types:
main
local
virtual
7.7.3 Other Available Services
Many other network modules are available in YaST Network Services.
DHCP Server
Use this to set up a custom DHCP server in only a few steps.
(page 655) provides basic knowledge about the subject and a step-by-step description
of the configuration process.
DNS Server
Configuring a DNS server that is responsible for name resolution is recommended
for larger networks. You can use DNS Server for this as described in
"Configuration with YaST"
(page 629) provides background information about DNS.
DNS and Hostname
Use this module to configure the hostname and DNS if these settings were not al-
ready made while configuring the network devices. Also use it to change the host-
172 Installation and Administration
Main or master domain of the local mail server
All users who can receive mail in a master domain can also receive mail in a
local domain. In the case of a message within the local domain, only the portion
before the @ is evaluated.
Only users with an explicit address within a virtual domain receive mail. Vir-
tual mail addresses are set up in the user management module of YaST.
(page 630). Chapter 34, The Domain Name System
Chapter 35, DHCP
Section 34.2,