Table of Contents
Advertisement
10.1 Supported Hardware
Multipath IO is available on all platforms supported by SUSE Linux Enterprise Server.
The following storage subsystems are detected automatically:
• 3Pardata VV
• Compaq HSV110 / MSA1000
• DDN SAN MultiDirector
• DEC HSG80
• EMC CLARiiON CX
• FSC CentricStor
• HP HSV110 / A6189A / Open-
• Hitachi DF400 / DF500 / DF600
• IBM 3542 / ProFibre 4000R / F20 / SVC / DS6000 / DS8000
• NETAPP
• SGI TP9100 / TP9300 / TP9400 / TP9500
• STK OPENstorage DS280
• SUN StorEdge 3510 / T4
Most other storage subsystems should work, but require manual configuration in /etc/
multipath.conf.
Storage subsystems that require special commands on failover from one path to the
other or require special nonstandard error handling might require more extensive support.
Therefore the DM framework has hooks for hardware handlers and one such handler
for the EMC CLARiiON CX family of arrays is already provided.
252
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
