Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 37

during the installation. The installation procedure is basically the same, no matter which
installation source or method you prefer.
Installing from the SUSE Linux Enterprise Media
Install from physical boot media (your SUSE Linux Enterprise media kit) as follows:
1 Insert the media into your CD or DVD drive.
2 Reboot the system.
3 At the boot screen, select Installation and follow the instructions given in
tion 3.3, "The Boot Screen"
Installing from a Network Server Using SLP
If your network setup supports OpenSLP and your network installation source has been
configured to announce itself via OpenSLP (see
Holding the Installation Sources"
Enterprise.
1 Set up an installation server as described in
Holding the Installation Sources"
2 Insert the first CD of the media kit into the CD-ROM drive an reboot the machine.
3 At the boot screen, select Installation, press
The installation program retrieves the location of the network installation source
using OpenSLP and configures the network connection with DHCP. If the DHCP
network configuration fails, you are prompted to enter the appropriate parameters
manually. The installation then proceeds normally.
4 Finish the installation as if you had chosen to install from physical media.
Installing from a Network Server
To perform a manual installation using a network installation source, proceed as follows:
(page 38) and the following sections.
Section 4.2, "Setting Up the Server
(page 78)), proceed as follows to install SUSE Linux
Section 4.2, "Setting Up the Server
(page 78).
then select SLP.
F4
Sec-
Installation with YaST 37