Modifying A Trusted Provider; Configuring Communication Security Settings - Novell ACCESS MANAGER 3.1 SP1 - IDENTITY SERVER Manual

9 Click OK, then update the Identity Server.
The wizard has you configured the required options and relies upon the default settings for
federation. For information about how to configure the default settings and how to configure
the other available options, see

5.4 Modifying a Trusted Provider

The following sections describe the configuration options available for identity providers and
service providers:
You can modify the following features of an identity provider:
Communication Security: See
Settings," on page
Attributes to Obtain at Authentication: See
Trusted Provider," on page
Metadata: See
Authentication Request: See
Identity Provider," on page
User Identification: See
Federation," on page
Authentication Card: See
Provider," on page
You can modify the following features of a service provider:
Communication Security: See
Settings," on page
Attributes to Send in the Response: See
Provider," on page
Intersite Transfer Service: See
Service Provider" on page
Metadata: See
Authentication Response: See
Service Provider," on page

5.4.1 Configuring Communication Security Settings

You can configure the security settings to control direct communication between the Identity Server
and a trusted provider across the SOAP back channel. These methods apply to the trusted identity
provider and are similar between Liberty and SAML.
1 In the Administration Console, click Devices > Identity Servers > Edit > [Protocol].
For the protocol, select Liberty, SAML 1.1, or SAML 2.0.
2 Click the name of a provider.
148 Novell Access Manager 3.1 SP1 Identity Server Guide
Section 5.4, "Modifying a Trusted Provider," on page
Section 5.4.1, "Configuring Communication Security
148.
155.
Section 5.4.4, "Managing Metadata," on page
Section 5.4.5, "Configuring an Authentication Request for an
159.
Chapter 8, "Configuring User Identification Methods for
209.
Section 5.4.7, "Managing the Authentication Card of an Identity
165.
Section 5.4.1, "Configuring Communication Security
148.
155.
"Configuring an Intersite Transfer Service Target for a
154.
Section 5.4.4, "Managing Metadata," on page
Section 5.4.6, "Configuring an Authentication Response for a
162.
Section 5.4.3, "Selecting Attributes for a
156.
Section 5.4.3, "Selecting Attributes for a Trusted
156.
148.