Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 80

7 Upload the installation data. The most lengthy step in configuring an installation
To deactivate an installation source, select Change in the overview to reach a list of all
available installation sources. Choose the entry to remove then select Delete. This delete
procedure only relates to the deactivation of the server service. The installation data itself
remains in the directory chosen. However, you can remove it manually.
If your installation server should provide the installation data for more than one product
of product version, start the YaST installation server module and select Configure in
the overview of existing installation sources to configure the new installation source.
4.2.2 Setting Up an NFS Installation Source
Setting up an NFS source for installation is basically done in two steps. In the first step,
create the directory structure holding the installation data and copy the installation
media over to this structure. Second, export the directory holding the installation data
to the network.
To create a directory holding the installation data, proceed as follows:
1 Log in as root.
2 Create a directory that should later hold all installation data and change into this
80 Installation and Administration
server is copying the actual installation CDs. Insert the media in the sequence
requested by YaST and wait for the copying procedure to end. When the sources
have been fully copied, return to the overview of existing information sources
and close the configuration by selecting Finish.
Your installation server is now fully configured and ready for service. It is auto-
matically started every time the system is started. No further intervention is re-
quired. You only need to configure and start this service correctly by hand if you
have deactivated the automatic configuration of the selected network service
with YaST as an initial step.
Manually
directory. For example:
mkdir install/product/productversion
cd install/product/productversion