Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 04-08-2006 Installation Manual page 530

such as powersaved, is the best approach. A static setting to a low frequency is useful
for battery operation or if you want the computer to be cool or quiet.
Throttling should be used as the last resort, for example, to extend the battery operation
time despite a high system load. However, some systems do not run smoothly when
they are throttled too much. Moreover, CPU throttling does not make sense if the CPU
has little to do.
In SUSE Linux Enterprise these technologies are controlled by the powersave daemon.
The configuration is explained in
29.3.3 ACPI Tools
The range of more or less comprehensive ACPI utilities includes tools that merely display
information, like the battery charge level and the temperature (acpi, klaptopdaemon,
wmacpimon, etc.), tools that facilitate the access to the structures in /proc/acpi or
that assist in monitoring changes (akpi, acpiw, gtkacpiw), and tools for editing the ACPI
tables in the BIOS (package pmtools).
29.3.4 Troubleshooting
There are two different types of problems. On one hand, the ACPI code of the kernel
may contain bugs that were not detected in time. In this case, a solution will be made
available for download. More often, however, the problems are caused by the BIOS.
Sometimes, deviations from the ACPI specification are purposely integrated in the
BIOS to circumvent errors in the ACPI implementation in other widespread operating
systems. Hardware components that have serious errors in the ACPI implementation
are recorded in a blacklist that prevents the Linux kernel from using ACPI for these
components.
The first thing to do when problems are encountered is to update the BIOS. If the
computer does not boot at all, one of the following boot parameters may be helpful:
pci=noacpi
Do not use ACPI for configuring the PCI devices.
acpi=oldboot
Only perform a simple resource configuration. Do not use ACPI for other purposes.
530 Installation and Administration
Section 29.5, "The powersave Package" (page 533).